GE PlacementPaper WholeTestpaper GE Tech Stress Materials 20112012 05 May 2012
GE Technical Interview Questions & Answers  Technical Interview Questions & Tips  Strength Of Materials Interview Questions
Latest Interview Questions & Answers
GE Strength of Materials Frequently Asked Questions and answers
1 Why do we have to make the assumption that plane sections plane?
In order to make calculation of stresses due to torsion easy, we need to make certain simplifying assumptions on the deformation pattern which is realistic. It is has been found from the rigorous solution procedure (elasticity solution) and from the experiments that the circular cross section members subjected to pure torsion in the elastic range satisfy very closely this condition of plane sections remain plane and rigid. By making this assumption, the solution procedure becomes simple as shown in the ‘basic concepts’ section in the derivation for torsional stresses.
2 How about bars with nonaxis symmetric cross section?
For bars with nonax symmetric cross section, the assumption of plane section remain plane is not satisfied. Regions of the crosssection undergo deformations in the axial direction leading to ‘warping’ of the section. There are again certain simplifying assumptions which are relaxation of the ax symmetric bar assumption that can be used to find stresses in a nonax symmetric bar.
3 The formulae derived look very similar to beam and axial deformation formulae?
The formulae derived look very similar to beam and axial deformation formulae?
Yes, that’s true. In all the three derivations pertaining to axial, beam and torsional deformations, the assumption of plane section remains plane is used and it leads to very similar formulae for these three types of structural members.
4Is the derivation for composite axis symmetric bar subjected to torsion similar to the composite beam derivation?
Yes. Since plane sections remain plane assumption holds good for composite bar subjected to torsion, similar principle as derivation for composite beam can be used to solve for stresses in a composite bar subjected to torsion.
5 What if material is nonisotropic?
If the material is nonisotropic (i.e. anisotropic), then the elastic modulii will vary and thus the problem will be completely different with additional stresses appearing since there is a coupling between shear stresses and normal stresses for an anisotropic material.
6 What if material goes to plastic range?
Even, if the material goes to plastic range, plane sections remain plane assumption is assumed to hold. Therefore, the strains can be found out from which distribution of stresses can be derived from equilibrium principles.
7 What about nonlinear elastic materials?
8 Why is the variation of shear strain with radius linear?
For nonlinear elastic materials again, the elastic modulii are different and are functions of the strains. Therefore, while solving for stresses, appropriate constitutive law should be used before applying the equilibrium conditions.
9 What do we do for stepped shafts?
10 Why do they have a tapering change in c.s. for stepped shafts?
For stepped shafts, away from the abrupt change in the crosssection, the stresses can be computed using the same formulae derived taking appropriate diameter of the shaft portion in to consideration. (See: Worked out Examples: Stepped Shafts). At the region of change in geometry, stress concentrations can occur due to abrupt change radius. (refer to 'stress concentration' section of "Advanced Topics")
11 Why deal with torsion of an axis symmetric bar?
12 How do I solve for stresses in the case of impact torque on an axis symmetric bar?
13 Why is the variation of shear strain with radius linear?
14 This emanates from the fact that the crosssection rotates as a rigid body because of axis symmetry condition of the crosssectional geometry and the antiaxis symmetry of the torque. Since the crosssection rotates as a rigid body, the amount of rotation is linear with respect to the variation in radius.
15 deal with torsion of an axis symmetric bar?
16 How do I solve for stresses in the case of impact torque on an axis symmetric bar?
GE Technical Interview Questions & Answers  Technical Interview Questions & Tips  Strength Of Materials Interview Questions
Latest Interview Questions & Answers
GE Strength of Materials Frequently Asked Questions and answers
1 Why do we have to make the assumption that plane sections plane?
In order to make calculation of stresses due to torsion easy, we need to make certain simplifying assumptions on the deformation pattern which is realistic. It is has been found from the rigorous solution procedure (elasticity solution) and from the experiments that the circular cross section members subjected to pure torsion in the elastic range satisfy very closely this condition of plane sections remain plane and rigid. By making this assumption, the solution procedure becomes simple as shown in the ‘basic concepts’ section in the derivation for torsional stresses.
2 How about bars with nonaxis symmetric cross section?
For bars with nonax symmetric cross section, the assumption of plane section remain plane is not satisfied. Regions of the crosssection undergo deformations in the axial direction leading to ‘warping’ of the section. There are again certain simplifying assumptions which are relaxation of the ax symmetric bar assumption that can be used to find stresses in a nonax symmetric bar.
3 The formulae derived look very similar to beam and axial deformation formulae?
The formulae derived look very similar to beam and axial deformation formulae?
Yes, that’s true. In all the three derivations pertaining to axial, beam and torsional deformations, the assumption of plane section remains plane is used and it leads to very similar formulae for these three types of structural members.
4Is the derivation for composite axis symmetric bar subjected to torsion similar to the composite beam derivation?
Yes. Since plane sections remain plane assumption holds good for composite bar subjected to torsion, similar principle as derivation for composite beam can be used to solve for stresses in a composite bar subjected to torsion.
5 What if material is nonisotropic?
If the material is nonisotropic (i.e. anisotropic), then the elastic modulii will vary and thus the problem will be completely different with additional stresses appearing since there is a coupling between shear stresses and normal stresses for an anisotropic material.
6 What if material goes to plastic range?
Even, if the material goes to plastic range, plane sections remain plane assumption is assumed to hold. Therefore, the strains can be found out from which distribution of stresses can be derived from equilibrium principles.
7 What about nonlinear elastic materials?
8 Why is the variation of shear strain with radius linear?
For nonlinear elastic materials again, the elastic modulii are different and are functions of the strains. Therefore, while solving for stresses, appropriate constitutive law should be used before applying the equilibrium conditions.
9 What do we do for stepped shafts?
10 Why do they have a tapering change in c.s. for stepped shafts?
For stepped shafts, away from the abrupt change in the crosssection, the stresses can be computed using the same formulae derived taking appropriate diameter of the shaft portion in to consideration. (See: Worked out Examples: Stepped Shafts). At the region of change in geometry, stress concentrations can occur due to abrupt change radius. (refer to 'stress concentration' section of "Advanced Topics")
11 Why deal with torsion of an axis symmetric bar?
12 How do I solve for stresses in the case of impact torque on an axis symmetric bar?
13 Why is the variation of shear strain with radius linear?
14 This emanates from the fact that the crosssection rotates as a rigid body because of axis symmetry condition of the crosssectional geometry and the antiaxis symmetry of the torque. Since the crosssection rotates as a rigid body, the amount of rotation is linear with respect to the variation in radius.
15 deal with torsion of an axis symmetric bar?
16 How do I solve for stresses in the case of impact torque on an axis symmetric bar?


Your comment 

0 Answers 